Share

    Ashburn, Virginia 20149, United States

Tumbled bricks are just regular bricks that can be described as “distressed.” They have rounded edges and enough nicks, dings, and scratches that they look as if they’ve been around forever and had a hard life. This can be done artificially by tumbling to mimic the look of old, reused, or even handmade brick.

The modular size shown in the picture is most common for wall veneering.

* Product usually ships within 7-15 business days


This specific brick initially originates from a full brick. Due to the fragility of this product, occasional microscopic cracks are very common caused by bricks firing and some will crack during cutting process.

Needless to say, this product is not flawless from the very start. In order to achieve a thin veneer form, it requires cutting. This type of process involves selling a full brick with an additional charge for cutting it. Thin veneer recovery is never a 100%. We typically pack the entire order amount which will include the fractured pieces into the boxes. Due to the wet cutting process, some moisture might be present. Therefore, this specific product is always cut to a specific order, shipped immediately, and its intended to be unpackaged and installed by customer asap, allowing proper and natural exposure to environment.

In most cases customers utilize cracked pieces for cuts and infills. Others seek the broken pieces to add more character to the finished product. There are minimums and quantity roundups applied to match full brick purchasing requirements. With all this being said, the latest technology available, and fully automated process we are capable of producing tens of thousands of cuts each day, consequently reducing product price, and increasing options of thin brick veneer textures and colors for our clients. At the end of the day our customers can achieve desirable look that seemed impossible.


Molded Full Bed Brick is produced in wooden molds. This process delivers two usable sides of brick, allowing us to achieve two thin bricks out of one full one. However, we only get one corner out of one full brick.

Thin Brick
Thin Brick Corner, 90 Deg.

Extruded bricks are typically manufactured to conform to the requirements of the American Society for Testing and Materials (ASTM) Standard Specification C 216, Exterior Grade, Type FBS and all grades of ASTM C 62. These products also conform to the requirements of ASTM C 216.

Thin bricks are manufactured to provide specific dimensional tolerances. The dimensional tolerances of the product are intended to be within the requirements of ASTM C 1088, Type TBS for general use.

TBX type bricks might be available upon special request but are not displayed in our online store.

Note: Product colors are illustrated as accurately as photographic & digital reproduction techniques allow. Final color selection should be made from actual product samples.


Order Mortar Color Sample

Price:
- (per sample)
Mortar Sample Color:




See us on DIY Network

Jason Cameron and former NFL great Tony Siragusa offer ideas for the ultimate man caves

They wrote about us

“The best material for the job is brick veneer, or thin brick, typically between a half-inch…"

Resources

architects corner: specs, test reports, instructions, warranties, cad, bim, green…