Share

    Ashburn, Virginia 20149, United States

A new, rustic, kiln-flashed “iron-spot” thin brick series available in our standard modular size. The new Ironspot Thin Brick will feature subtle ranging tones and naturally occurring flashing.

Smooth bricks, also known as extruded bricks, are made using a more modern method of brick manufacturing. Relatively low moisture clay is extruded through a die to form a column. This column of clay is then cut with wires to split the clay into individual bricks. They tend to be more uniform in size and shape. Usually, this type of brick is used in commercial applications or contemporary settings.

The modular size shown in the picture is most common for wall veneering.

Sampling specific lots is highly recommended as lots may change significantly.

 

Thin Brick
Thin Brick Corner, 90 Deg.

Extruded bricks are typically manufactured to conform to the requirements of the American Society for Testing and Materials (ASTM) Standard Specification C 216, Exterior Grade, Type FBS and all grades of ASTM C 62. These products also conform to the requirements of ASTM C 216.

Thin bricks are manufactured to provide specific dimensional tolerances. The dimensional tolerances of the product are intended to be within the requirements of ASTM C 1088, Type TBS for general use.

TBX type bricks might be available upon special request but are not displayed in our online store.

Note: Product colors are illustrated as accurately as photographic & digital reproduction techniques allow. Final color selection should be made from actual product samples.


Order Mortar Color Sample

Price:
- (per sample)
Mortar Sample Color:




See us on DIY Network

Jason Cameron and former NFL great Tony Siragusa offer ideas for the ultimate man caves

They wrote about us

“The best material for the job is brick veneer, or thin brick, typically between a half-inch…"

Resources

architects corner: specs, test reports, instructions, warranties, cad, bim, green…