Ashburn, Virginia 20149, United States

Wire cut bricks also known as extruded bricks, are made using a more modern method of brick manufacturing. Relatively low moisture clay is extruded through a die to form a column.  This column of clay is then cut with wires to split the clay into individual bricks. They tend to be more uniform in size and shape. Usually this type of brick is used in commercial applications or contemporary settings.

Modular size shown in the picture is most common for wall veneering.

* Product usually ships within 2-3 business days

Thin Brick
Thin Brick Corner, 90 Deg.
Edge Cap
Edge Cap Corner, Left
Edge Cap Corner, Right

Modular size shown in the picture is most common for wall veneering.

Wire cut bricks will meet or exceed all requirements as set forth in ASTM C-1088, Type TBS, Grade Exterior.

Specification. Test. Standard. Summitville Thin Brick

Saturation Coefficient ASTM C-1088 N/A N/A

Efflorescence ASTM C-67 None Not Efflorescent

Chipping ASTM C-1088 Max 3% < 2 %

Size ASTM C-1088 TBX Grade Exceeds Standard

Warpage ASTM C-1088 TBX Grade Exceeds Standard

Modulus of Rupture ASTM C-67 250 Lbs/si 500 Lbs /si

Compressive Strength ASTM C-67 8,000 lbs/si 10,000 lbs/si

Absorption ASTM C-1088 17% < 6 %

Freeze Thaw ASTM C-67 Min 50 Cycles Exceeds Standard

Shear Bond Strength ASTM C-482 Min 50 psi > 150 psi

{To Portland Cement}

Chemical Resistance ASTM C-650 Not Affected Not Affected

Note: Product colors are illustrated as accurately as photographic & digital reproduction techniques allow. Final color selection should be made from actual product samples.

Order Mortar Color Sample

- (per sample)
Mortar Sample Color:

See us on DIY Network

Jason Cameron and former NFL great Tony Siragusa offer ideas for the ultimate man caves

They wrote about us

“The best material for the job is brick veneer, or thin brick, typically between a half-inch…"


architects corner: specs, test reports, instructions, warranties, cad, bim, green…