52DD Paver

Bricks are packaged and sold by the cube, a standard shipping unit that typically contains several hundred bricks stacked and wrapped for safe transport.

Brick Shape

Below you can choose the size and shape of the brick you want to order.

Cube of Brick

Paver (PAV) - Solid Brick Cube ( 475 bricks )

3 5/8 × 7 5/8

$674.50

Order 52dd Paver by cube.

52DD Paver

Sampleboard

Variation in color and texture is natural and to be expected. Lot-specific samples may be available upon special request and are considered for customers intending to place a product order. Please note that these requests require additional processing time.

Small Size

13×13

$19.99 / Board

Paver (PAV)

H 3 5/8" × L 7 5/8" × T "

$0.00

Order a sample board of 52dd Paver thin brick to see its texture, color, and character firsthand.

We recommend ordering one before your final selection. Feel the surface and see the brick in your own light.

Sample boards use real brick taken at random. They show general character only; natural variation in color and texture is expected.

Make your final selection at this stage. For a closer look, request a lot-specific sample or order brick for a mockup during design, not after delivery.

Overview

Manufacturer: Glen Gery, a brand of BRICKWORKS Molded bricks are often referred to as sand struck meaning that sand is used as a lubricant to release the clay from the molds and as a way to provide different colors. These sand struck bricks are produced with varying degrees of sand on all surfaces except one bedding surface. Molded bricks have characteristics that give both residential and commercial facades a traditional unique warmth and depth. The rich texture, color, and appeal of machine molded brick enriches the exterior of any building and creates a classic look that will stand the test of time.

Technical Information

Molded bricks are typically manufactured to conform to the requirements of the American Society for Testing and Materials (ASTM) Standard Specification C 216, Grade SW, Type FBS and all grades of ASTM C 62. These products also conform to the requirements of ASTM C 216, Grade MW. The average maximum hot-water absorption by submersion in boiling water for five hours is less than 15%