Wire Lath Self-Furring

A self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry and other solid surfaces as required per ASTM C1063. The dimple self-furring plaster base is manufactured with evenly spaced indentations that hold the metal lath ¼” away from the surface to be plastered.

TECHNICAL INFO:

A self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry and other solid surfaces as required per ASTM C1063. The dimple self-furring plaster base is manufactured with evenly spaced indentations that hold the metal lath ¼” away from the surface to be plastered.

Lath and lath attachments shall be of corrosion-resistant materials in accordance with ASTM C1063. Expanded metal, welded wire, or woven wire lath shall be attached to wood framing members or furring. Where the exterior plaster is serving as wall bracing, the lath shall be attached directly to framing. The lath shall be attached with 1¹/₂-inch-long (38 mm), 11-gage nails having a ⁷/₁₆-inch (11.1 mm) head, or ⁷/₈-inch-long (22.2 mm), 16-gage staples, spaced not more than 7 inches (178 mm) on center along framing members or furring and not more than 24 inches (610 mm) on center between framing members or furring, or as otherwise approved. 

Additional fastening between wood framing members shall not be prohibited. Lath attachments to cold-formed steel framing or to masonry, stone, or concrete substrates shall be in accordance with ASTM C1063. Where lath is installed directly over foam sheathing.