Share

    Columbus, Ohio 43215, United States

Georgian Handmade

USE ORDER CONFIGURATOR

Please register or log in to have an access to our unique brick calculator.
You will be able to create bill of materials for your project and estimate costs.

START YOUR ORDER

Order Sample

Genuine bricks on these boards are presented as a guideline and give a broad general idea of the product. They are routinely chosen from random lots. The final product range of color & texture variations are typical.

Price:
- (per sample board)
Brick Size:

( Minimum quantity: )

Handmade bricks are the most labor-intensive. They are individually hand-pressed in sand-coated wooden molds. They have a rich character and are often the best match for older settings. Handmade molded bricks are often referred to as “sand struck,” meaning that sand is used as a lubricant to release the clay from the molds and as a way to provide different colors. These “sand-struck” bricks are produced with varying degrees of sand on all surfaces except one bedding surface.

Full Brick, Solid

Unit Specifications

Glen-Gery handmade bricks are typically manufactured to conform to the requirements of American Society for Testing and Materials (ASTM) Standard Specification C 216, Grade SW, Type FBA and all grades of ASTM C 62. These products also conform to the requirements of ASTM C 216, Grade MW. Certain products meet the requirements of ASTM C 902 or ASTM C 32. Inquiries should be made for specific applications or conformance to standards other than ASTM C 216 or C 62.

Dimensional Tolerances
Glen-Gery handmade bricks are manufactured to provide a unique appearance resulting from nonuniformity in size. For this reason, ASTM C 216, Type FBS maximum permissible dimensional variations are not applicable. These brick are manufactured as Type FBA brick. The product ordered will generally contain a number of units which are over or under the specified dimensions. The dimensional variations are part of the handmolded process coupled with the raw materials as well as the drying and firing processes which gives each application a unique appearance. Thus, for some products, all the units may be slightly over or slightly under the specified dimensions.

Note: Product colors are illustrated as accurately as photographic & digital reproduction techniques allow. Final color selection should be made from actual product samples.


Order Mortar Color Sample

Price:
- (per sample)
Mortar Sample Color:




See us on DIY Network

Jason Cameron and former NFL great Tony Siragusa offer ideas for the ultimate man caves

They wrote about us

“The best material for the job is brick veneer, or thin brick, typically between a half-inch…"

Resources

architects corner: specs, test reports, instructions, warranties, cad, bim, green…