Ashburn, Virginia 20149, United States

Mohawk EIFS Basecoat

/ per unit


EIFS Base Coat adhesive is designed to be used as an adhesive and base coat in stucco. It requires water only and will cure to a long-lasting coating with great bonding qualities. The Dry-Mix is equal to Wet Base Coat which is used as a base to embed reinforcing mesh in various Systems and as a leveling coat for masonry, concrete, or stucco surfaces.

1. When EIFS Base Coat adhesive is applied as an adhesive using a 3/8” x 3/8” x 3/8” notched trowel to adhere expanded polystyrene (EPS) insulation board to suitable substrates (70-80 sq/ft) per bag.

2. When applied as a EIFS Base Coat adhesive for embedding of Reinforcing Mesh expect:

4.3oz = 130-140 sq/ft per bag

15oz = 90-100 sq/ft per bag

20oz = 70-80 sq/ft per bag

3. When applied as a leveling coat coverage depends on the thickness applied.

Note: Coverage may vary depending on job conditions and applicator.
Store Dry EIFS Base Coat adhesive in a cool dry place. Protect from moisture and direct sunlight.
Dry EIFS Base Coat adhesive is good for six (6) months if stored off the ground in a dry area. High humidity will reduce the shelf life.

See us on DIY Network

Jason Cameron and former NFL great Tony Siragusa offer ideas for the ultimate man caves

They wrote about us

“The best material for the job is brick veneer, or thin brick, typically between a half-inch…"


architects corner: specs, test reports, instructions, warranties, cad, bim, green…