BELGIUM HANDMADE MOLDED

This specific brick initially originates from a full brick. Due to the fragility of this product, occasional microscopic cracks are very common caused by bricks firing and some will crack during cutting process.

Needless to say, this product is not flawless from the very start. In order to achieve a thin veneer form, it requires cutting. This type of process involves selling a full brick with an additional charge for cutting it. Thin veneer recovery is never a 100%. We typically pack the entire order amount which will include the fractured pieces into the boxes. Due to the wet cutting process, some moisture might be present. Therefore, this specific product is always cut to a specific order, shipped immediately, and its intended to be unpackaged and installed by customer asap, allowing proper and natural exposure to environment.

In most cases customers utilize cracked pieces for cuts and infills. Others seek the broken pieces to add more character to the finished product. There are minimums and quantity roundups applied to match full brick purchasing requirements. With all this being said, the latest technology available, and fully automated process we are capable of producing tens of thousands of cuts each day, consequently reducing product price, and increasing options of thin brick veneer textures and colors for our clients. At the end of the day our customers can achieve desirable look that seemed impossible.

Molded Full Bed Brick is produced in wooden molds. This process delivers two usable sides of brick, allowing us to achieve two thin bricks out of one full one. However, we only get one corner out of one full brick.

We recommend purchasing certain amount of materials in addition to required quantities. Recommended minimum overages (Brick and System Waste) for this product are prepopulated in the fields above, but feel free to raise them to match your personal comfort level.
 

Brick-It™ Systems Material's List

Brick Thicknes: ?
Sq. Footage Needed: ?
Linear Feet Needed (of corners): ?
Faces Per Brick
(1 Brick Per Corner) ?
Brick Cubes
?
Brick Straps
?
Bricks Packs
?
Corners Packs
?

Bricks Required

Name: BELGIUM HANDMADE MOLDED
?

Flat Stretcher Cutting Service Charge

BELGIUM HANDMADE MOLDED
?

# Of Brick Corners Required

Name: BELGIUM HANDMADE MOLDED
?

Corner Cutting Service Charge

BELGIUM HANDMADE MOLDED
?

Brick-It™ System Component Required


?

Pointing Mortar Required

?

See us on DIY Network

Jason Cameron and former NFL great Tony Siragusa offer ideas for the ultimate man caves

They wrote about us

“The best material for the job is brick veneer, or thin brick, typically between a half-inch…"

Resources

architects corner: specs, test reports, instructions, warranties, cad, bim, green…