Ashburn, Virginia 20149, United States

EIFS Assembled Fasteners

/ per unit


Assembled EIFS fastener PBH Washers and Wood Lite-Metal hi-low thread fasteners for use with dimensional lumber, plywood and lite-gauge metal application, 20- to 26-gauge.

Degrashield® Protection for Exterior Applications on EIFS or Decks: Meets or exceeds ASTM B117 20 cycles - 10% or less red rust. Salt spray 500 hours - 10% or less red rust on our wood lite metal and steel screws.
Excellent for use in fastening foam to EIFS walls or on exterior decking

EIFS Wood Lite Metal screws fasteners must have the best available protective coating. Because of this, we only offer the highest quality coated fasteners you can buy. All of our EIFS wood lite metal fasteners have the approved DegraShield® exterior quality coating.

Our fasteners not only meet the EIFS fastener coating requirement—

We exceed them!

1. Insulation Board shall be attached to the approved substrate horizontally with vertical joints staggered and butted tightly.

2. PBH is designed to be used with EIFS Manufacturers

PB EIFS systems.

3. Screws shall meet ASTM B117

4. Install the PBH EIFS washers in a manner so the fastener

is flush with the surface of the Insulation Board. Do not exceed 1.6 mm (1/16”) below the surface.

5. Rasp the surface of the Insulation Board with a DuraRasp, TigerClaw or DuraVac DuraRasp™ to remove any irregularities.

See us on DIY Network

Jason Cameron and former NFL great Tony Siragusa offer ideas for the ultimate man caves

They wrote about us

“The best material for the job is brick veneer, or thin brick, typically between a half-inch…"


architects corner: specs, test reports, instructions, warranties, cad, bim, green…